Kriss Holdings Pvt Ltd


4 X 5m Tarpaulin Sheets




We have a team of qualified personnel to ensure proper quality control of products is done so that products are as per buyer's quality requirements. Raw material that is used for preparing the offered lot is sourced from the genuine vendors. Also, we procure it only after complete quality inspection. Plastic Tarpaulins 4 x 5 m with Aluminium Eyelets or 4 x 50m without eyelets

Details :

  • Tarpaulin Size -  the finished size of each sheet is 4 x 5 meters +/- 1 %. Or 4 x 50m rolls +/-1%  Effective area -  20.00 m2
  • Material -  made of woven high-density black polyethylene (HDPE) fibers, warp x weft, laminated on both sides with low density polyethylene (LDPE) coating, with reinforced rims by heat sealing on all sides, (or 2 sides heat sealing and 2 sides double stitching), and a 5 millimetres diameter PE or PP rope on the edge, inside the hem. 1000 denier minimum.
  • Material weight -  minimum 190 gr/m2 +/-20g/m2.
  • Tensile strength -  minimum 600 N both directions of warp and weft (BS 2576, 50 mm grab test, or equivalent).
  • Tear strength -  minimum 100 N both directions (BS 4303 wing tear or equivalent) or under ISO 4674 (A2).
  • UV Resistance -  stabilized against ultraviolet rays and excess heat for long  Outdoor exposure. Maximum 5% loss on original tensile strength under ISO  1421 after 1500 hours UV under ASTM G53/94 (UVB 313 nm peak).
  • Welding -  Only one (01) is allowed along the middle of the sheet, length wise. Minimum resistance is 80 % of the original tarpaulin tensile strength in the weft under ISO 1421 plus additional procedure.
  • Reinforcement eyelets -  Provided with aluminium eyelets or equivalent on four sheet sides of the single sheets at 100 cm +/-5cm centre to centre, providing very strong fixation points. No eyelets for rolls.
  • Flammability -  CPAI 84-1995, section 6.
  • Colour -  white sun reflective on both sides. Inner black fibers to ensure opacity.


Packing Details :

  • 5 pcs/Bale
  • Gross weight per bale -  approx. 21.35 Kg
  • Gross volume per bale -  approx. 0.0450 cbm
  • 3.500 pieces / sheets per 20’DC (without pallets).
  • 5.500 pieces / sheets per 40’ DC (without pallets).
  • 2.200 pieces / sheets per 20’ DC (with pallets).
  • 4.600 pieces / sheets per 40’ DC (with pallets).



Enquiry Form

* fields are mandatory Enquiry Details
* Subject :
* Details :
Contact Information
* Your Name :
* Your Company Name :   Not Applicable
* Select Country :
* E-mail :  
* Mobile No. :